Speco N64NR, Руководство пользователя, Страница: 34 / 114

Live View
Introduction
NVR User Manual

Add Scheme
Click in area ① to create a new scheme. Click on the top right corner of the scheme to delete it.

Configure Scheme
a) Select a scheme in area ① and then click the screen mode button on the tool bar to set the screen mode of the
scheme.
b) Select a camera window in area ② and then double click the camera or group in area ③. The camera or group will
be added into the selected window. One camera in the same scheme cannot repeat. You can click the right-click menu
“Clear” in area ② to remove a single camera or click
to remove all the cameras.
c) Click “Apply” to save the settings.

Start Sequence View
Go to the live view interface and then click to open a window. Set the dwell time in the window and then click
to start scheme view in sequence. Double click the sequence view interface to pause the view; double click again to
restore the view. Click
to stop the view.
5.3 Image Configuration
5.3.1 OSD Settings
Click Start  Settings  Camera  Image  OSD Settings to go to the interface as shown below. Select the camera, enter
the camera name (or double click the camera name in the camera list to change the camera name), enable or disable
the name and time OSDs (if enabled, drag the red name and time OSDs directly in the image view area to change the
OSDs’ display position) and select the date and time formats. Click “Apply” to save the settings.
27