Speco N64NR, Руководство пользователя, Страница: 49 / 114

Record & Disk Management
NVR User Manual
Go to “Edit Schedules” interface and then click to edit the schedule. The settings of “Edit Schedule” are similar to
that of the “Add Schedule”. Click to delete the schedule.
7.4 Record Mode
7.4.1 Manual Recording
Method One : Click on the tool bar at the bottom of the live view interface to enable recording of the camera.
Method Two : Go to the live view interface and then click the right-click menu “Manually Record On” in the camera
window or click on the tool bar under the camera window to start recording.
7.4.2 Timing Recording
Timing Recording : the system will record automatically according to the schedule.
Set the timing record schedule of each camera. See 7.3 Schedule Setting for details.
7.4.3 Motion Based Recording
Motion Based Recording : the system will start motion based recording when the motion object appears in the setup
schedule. The setup steps are as follows:
1 Set the motion based recording schedule of each camera. See Setting for details.
2 Enable the motion and set the motion area of each camera. See 9.2.1 Motion Configuration for details.
The camera will start motion based recording once you finish the above settings.
7.4.4 Sensor Based Recording
1 Set the sensor based recording schedule of each camera. See Setting for details.
2 Set the NO/NC type of the sensor, enable the sensor alarm and then check and configure the “Record”. See 9.1
Sensor Alarm for details.
7.4.5 Analytics Recording
1 Set the analytics recording schedule of each IP camera. See 7.3 Schedule Setting for details.
2 Enable the intelligence alarm detection (object detection, exception, tripwire or intrusion) and draw alert surface or
warning area of each IP camera. See Event for details.
42
Note: Click Start

Settings

Record

Mode Settings and then set the manual record time in the
interface. Click “Apply” to save the settings.