![background image](http://html1.mh-extra.com/html/speck-pumps/badu-stream-ii/badu-stream-ii_installation-manual_1341828019.webp)
PATTERN ON LED DISPLAY
CONDITION
Flashing Dash (-) with an interval of ~200ms
Ideal with no Relay/Pump on
Flashing ‘P’ with the interval of ~200ms
No WiFi connection, Wrong Wifi Password
Flashing ‘O’ (Capital O) with an interval of
~200ms
No cloud connection due to server down or no internet
Flashing ‘o’ (Small o ) with an interval of 200ms
Device has not been set up to connect to WiFi
Flashing ‘ ’ (triple bars) with an interval of 200ms
The device is doing OTA Firmware update
Flashing ‘E’ with an interval of ~200ms
Hardware error
Flashing ‘L’ with an interval of ~200ms
Pool light error
Steady 2
Port 2 is on manually (No Timer/Schedule)
Steady 3
Port 3 is on manually (No Timer/Schedule)
Steady 4
Port 4 is on manually (No Timer/Schedule)
Steady 5
Port 5 is on manually (No Timer/Schedule)
Steady 1 with flashing dot.
The dot will flash with an interval of ~100ms
Port 1 is on a schedule based on Time of Day.
Steady 2 with flashing dot.
The dot will flash with an interval of ~100ms
Port 2 is on a schedule based on Time of Day.
Steady 3 with flashing dot.
The dot will flash with an interval of ~100ms
Port 3 is on a schedule based on Time of Day.
Steady 4 with flashing dot.
The dot will flash with an interval of ~100ms
Port 4 is on a schedule based on Time of Day.
Steady 5 with flashing dot.
The dot will flash with an interval of ~100ms
Port 5 is on a schedule based on Time of Day.
Flashing 1 with the interval of ~100ms
Port 1 is on a countdown timer
Flashing 2 with the interval of ~100ms
Port 2 is on a countdown timer
Flashing 3 with the interval of ~100ms
Port 3 is on a countdown timer
Flashing 4 with the interval of ~100ms
Port 4 is on a countdown timer
Flashing 5 with the interval of ~100ms
Port 5 is on a countdown timer
Blue light is ON
Touch Button LED: When Port 1 or 2 is OFF
Green-light is ON
Touch Button LED: When Port 2 is ON in manual mode
Green light is Flashing
1 second interval flashing when time remaining is more
than 2 minutes otherwise flashes with 0.5 second
Touch Button LED: When Port 1 or 2 is ON in Timer or
schedular mode
Red light is flashing
Touch Button LED: When there is an error with the
Swimjet Light (Port 2)
Table 2
LED Codes & Meanings
Table 1
COLOR
MEANING
Solid BLUE
SwimJet System is OFF
Flashing GREEN every 1 second
SwimJet System is ON with 2 hour timer
Flashing GREEN every 1/2 second
This is a 2 minute warning on the 2 hour timer.
Once the 2 minutes have passed the swimjet
system will automatically turn OFF.
LED Touch Button Color Codes
19
Electrical - SPECK Controller Installation - Continued