The BaduStream System is provided with a set of nozzle
adjustment tools. These tools will allow the user to set
the jet nozzles into position for optimum performance.
When setting the nozzles for basic swimming, it is
recommended that you set the nozzles in such a way
that each nozzle intersects 4 feet away while breaking
the surface at the same time. To help set the nozzles
in position for best performance, please follow these
instructions:
1. Extend the nozzle adjustment tool to full length.
2. Place each nozzle adjustment tool into the jet nozzles
on the BaduStream housing.
3. Once that is complete, bring the blue nozzle tool up to
where the end of the nozzle tool breaks the surface of
the water. Then bring the two nozzles tools together to
meet. (See Figure 16)
Nozzle Adjustment Tools
NOTE: Though the nozzle adjustment tools are designed for
outdoor use, it is advised to protect them from continuous
direct heat.
20
4
Service and Maintenance
Nozzle Adjustment
Perspective View
Water Level
~10”
Side View
Top View
10”
Figure 16
BaduStream Nozzle Adjustment
Winterizing
In areas subject to freezing water temperatures, you
should protect your equipment. We recommend you
purchase a winter cover kit part #2308752006K. This
kit includes one (1) winter plate, one (1) gasket and
four (4) screws.
Also, you can protect your swimjet system as follows:
Drain pool until water level has dropped below
the anti-entrapment cover. Then protect pump by
removing drain plug and red filler plug (or lid).
Figure 5
Winter Cover Kit
Gasket
Winter Plate
