Air Regulator
Discharge Line
Vertical
Check Valve
Vertical Suction Line
6
"
R
is
er
Control Box
Valves (Optional)
Discharge Line
Horizontal Suction Line
4"
4"
4"
4"
4"
3"
M
in
im
um
Horizontal
1
2"
M
ax
im
un
4
F
ee
t
Allow 12" to prevent
cavitation of the pump
Disconnect
Service
Water Level
Pump
Pressure Line
max. 30 feet with 4 " pipe
(Check Valve(s) are required if the pump is
more than 4 ft.
ABOVE
the Water Level)
Plumbing Installation - continued
10
* 6” pipe will allow distances of well over 50 ft. There is
50ft of cable included with the touch button. If a longer
distance to the control box is required, a junction box
can be installed above the water line to splice additional
cable as required.
Figure 4
NOTE: Valves are recommended when pump is installed below water level
(flooded suction applications).
NOTE: To avoid stress on the jet housing, the jet housing and 2 to 3 inches of
plumbing stub out may be encased in gunite or concrete.
NOTE: The BaduSteam assembly package contains all necessary parts for the installation of the unit into concrete, gunite,
liner or fiberglass pools.
CAUTION: All necessary screws and bolts included with the BaduStream are stainless steel. ALL screw threads and
threaded inserts are METRIC! ONLY METRIC bolts and nuts may be used! The two exceptions are the suction and discharge
connections on the BaduStream and pump housing (4” slip connections) and the mounting hardware for the air regulator
assembly (1/4 -20 threads). All screws should be HAND TIGHT. DO NOT use drills or pneumatic tools. DO NOT over tighten!
Plumbing Requirements
BaduStream II
Pump
Distance
Pipe Size
Approx. Flow
TDH
Three Jets
(2) 4 HP
10 to 30 ft.
up to 50 ft.*
4”
6”
651 GPM
651 GPM
42 ft
42 ft
Two Jets
4 HP
10 to 30 ft.
up to 50 ft.*
4”
6”
380 GPM
400 GPM
34 ft
32 ft
One Jet
4 HP
10 to 30 ft.
up to 50 ft.*
4”
6”
217 GPM
217 GPM
53 ft
53 ft
One Jet
3 HP
10 to 30 ft.
up to 50 ft.*
4”
6”
200 GPM
200 GPM
12 ft
12 ft
