Speck pumpen BADU Eco Touch-pro, Руководство пользователя

Страница: 99 / 204

7 Defects
06/2014 VG 766.2000.055 EN 47
7 Defects
It is normal for a few drops of water to escape from the mechanical seal
from time to time. This is especially true during the break-in period.
Depending on the water quality and number of operating hours, the
mechanical seal can begin to leak.
Î
If water pours out constantly, replace the mechanical seal.
We recommend first informing the swimming pool contractor if there are
irregularities.
7.1 Overview – trouble shooting
Problems Possible
cause Solution
Pump is switched off by
the built-in or external
overload switch. Overload
Î
Check pump. See
Chapter 7.1.1,
page 47.
Pump is stuck. Sticky
mechanical seal
because of
longer idle
period.
Î
Turn the motor shaft
See Chapter 6.2,
page 45
.
Î
Clean pump.
Water is constantly
leaking from the pump. Mechanical seal
is leaking.
Î
Replace the
mechanical seal.
Loud motor noise. Defective ball
bearings.
Î
Have a mechanic
replace the ball
bearings.
7.1.1 Checking the pump after the overload switch has tripped.
If the motor has been switched off by the built-in or external overload
switch, carry out the following steps:
1. Disconnect system from the power supply.
2. Turn the motor shaft on the fan side using a screw driver and check
if it turns easily.