Specac GS15051, Руководство пользователя

Страница: 8 / 20

User Manual
6
3. Installation of the Low Tonnage Gauge Kit to
the Atlas™ Manual Hydraulic Press
The Low Tonnage Gauge Conversion Kit is an
additional assembly
of parts that a user can fit to
an Atlas™ 15T or 25T Manual Hydraulic
Press to provide a facility of a finer reading for any tonnage load being
applied, up to the maximum load capability of the particular low
tonnage gauge fitted.
Note: Specac recommend to test that the press you are using and
would wish to adapt with a low tonnage gauge kit is functioning
correctly to apply a tonnage load, before having to partially
dismantle some of the parts from the pump block assembly of
the press and rebuild it from the parts supplied with the low
tonnage gauge kit. If a subsequent fitting of new parts introduces
a problem of non-functionality (e.g. an airlock in the oil), you may
be able to pinpoint more readily what is needed to correct and to
get the new system operational.
Procedure for Fitting
To help in the explanation of the procedure for fitting a low tonnage
gauge kit to an Atlas™ manual hydraulic press, relevant parts in the
following diagrams (
Figs.
) have been identified with a “bubble” part
number that corresponds directly to the same part number as indicated
in the Atlas™ Manual Hydraulic Press’s own user instruction manual.
New parts from the low tonnage gauge kits have been “bubble” part
numbered accordingly for consistency with the press numbering
system.
The original load gauge (
31 ) (15 or 25 tons) of the press is removed
from the pump block assembly of the press and fitted to the manifold
body (
74 ) of the low tonnage gauge kit that already has the low
tonnage gauge ( 75 ) option (1 ton, 2 tons or 5 tons range) fitted. The
whole assembly of parts is then fitted onto the press at the pump block
assembly from where the 15 or 25 tons load gauge has been removed.