User Manual
8
The gauge connector (
39
) is then removed from the pump block
assembly by unscrewing the lower nut (
N2
)
connection by the “Dowty”
seal (
48
). (See
Fig 1.
and
Fig 2.
) (Unscrew - turn (
N2
)
anticlockwise
.)
Transfer the gauge connector (
39
) and Dowty seal (
48
) parts for fitting
to the bore opening (
76
) of the manifold body (
74
) by tightening of the
lower nut connection (
N2
). (See
Fig 1.
and
Fig 3.
) If the removed
Dowty seal (
48
) from the press is not suitable for re-use, then use the
spare seal provided with the low tonnage gauge kit.
Note:
The bore opening (76) on the manifold body (74) will be plugged
with a transport screw to prevent dust from entering. Remove
this screw before fitting of the gauge connector (39) and Dowty
seal (48) parts.
Fig 3. Front and Rear View of Low Tonnage Gauge Kit
Remove the dust cover cap from the fixing bolt (
77
) and Dowty seal
(
78
) parts at the base of the manifold assembly (
74
). (See
Fig 3
.)
75
76
78
79
74
78
75
77
77
Содержание GS15051
