Spearhead Rollicut 500, Руководство пользователя

Страница: 34 / 46

Spearhead Rollicut
500 & 600
34
Greasing
PTO Shaft Maintenance & Greasing

For maximum life and performance, the CV body must be greased regularly
on the primary shaft. Lubricate with the driveline in a straight position – up to
30 pumps of grease may be required

Dismantle the metal sliding tubes, clean and re-grease to operate properly

Shielding is subject to damage from abuse and weathering. Replace all
damaged components and all shielding removed during maintenance.

Do not use PTO adaptors with CV drivelines. Replace special Taper Pin
Bolts only with genuine OEM parts, periodically check tightness of nuts
(150Nm)

Consult PTO Manual for additional information
Primary Drive
The primary drive shaft has fitted a combined overrun and slip clutch; this should be stored in
the dry. After a long period of storage/use it may be necessary to disassemble the clutch to
check its condition.

All points should be lubricated every 8 hours of use
Secondary Drive