Spearhead Rollicut 500, Руководство пользователя

Страница: 15 / 46

Spearhead Rollicut
500 & 600
15
Setting Up Your Machine
Attaching to the Tractor
It is advisable to remove the tractor rear link arms. However, if this is not convenient,
lift the link arms to their highest position or lower them to their lowest position so they
do not contact the PTO shaft or drawbar when turning.
Before coupling to the tractor, it is important to check that the tractor draw bar is out
at its longest setting, which will give the tightest turning circle without risk of
bottoming out the PTO shaft.
When fitting the pin through the drawbar clevis, insert the plastic washer between the
tractor and machine drawbar as shown.
This washer is a replaceable wearing part (Part No. 4600139).