Spearhead Rollicut
500 & 600
44
Transporting Mower
First disengage the PTO drive and fully raise the machine. Fold the wings to fully
upright and ensure the locking hooks engage. Lift rear mower to maximum and
ensure the locking hooks engage fully.
Never transport along public highways with the wings only supported by the
hydraulics. Always ensure that the locking hooks are fully engaged.
Please observe Public Highway Regulations concerning the towing of implements
and ensure all rear lights are working.
The maximum recommended speed is
20MPH (30K).
Storage of Mower
At the end of the season before storing, thoroughly wash the machine off, removing
all traces of grass and dirt. Great care must be taken when washing with high-
pressure hoses, do not hold the water jet close to the paintwork. Use steam cleaners
with caution and be sure to remove all detergents to avoid any discoloring or damage
to paint. Grease all grease points until fresh grease shows. Store PTO shaft and
drive belts in a dry place. Control levers must be kept dry. Smear grease on all
areas vulnerable to corrosion, in particular the chrome ram rods.
Remember regular maintenance will greatly increase the life of the machine.
Содержание Rollicut 500
