8999071EN: v1.410/10/2019
17
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
6
Operating
IMPORTANT:
Before operating it is necessary to do the following:
Move away a transport blockade of the machine
6.1.1.1
Move away the pin to activate a mechanic breakaway. Put it on the proper position.
6.1.1.2
Lift both support feet.
6.1.1.3
If there is an uneven terrain, use floating system
– move away the inserted plate.
6.1.1.4
Figure 20
Figure 21
IMPORTANT:
Before starting check the terrain first for some stones, wood and other.
IMPORTANT:
If there is no other sign, max rpm of PTO shaft is 540 rpm.
IMPORTANT:
Before starting lift the machine for 10 cm. After starting the machine, put it on the ground into the
working position gently.
Working speed depends on working conditions and on the material cut. Optimal speed is between 3-8 km/h. In
the case of bigger material reduce the speed to avoid slipping of the belts.
WARNING!
It is strongly forbidden to activate PTO shaft if the machine is touching the ground in the
vertical position (Figure 22).
IMPORTANT:
At using hydraulic on the machine it is necessary to lift the machine enough to avoid touching the
ground (Figure 23).
