8999071EN: v1.410/10/2019
14
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
4
Transport & Attachment Of The Machine
4.1
Transport To The Customer
Unload the machine with special care to avoid any damage. For unloading use special holes on the frame
(Figure 12). Check that all nuts and bolts are fixed and tightened.
Figure 12
According to the dimensions of the machine and different possibilities of the transport, the machine can be sent
split assembled on the pallet or in the box.
4.2
Attachment And Detachment From The Tractor
Before any operation check:
That the machine is in good condition,
That all guards are on proper places and in good condition,
That working blades are complete and undamaged,
That all greasing points are greased well and that in gearbox is oil enough,
Appropriate tensioned belts,
That rpm and direction of rotation on the drive axle correspond to those on the machine.
To attach the machine to the tractor, bring the tractor lower lines near the machine, to the points corresponding
to the pins. Insert the pins and secure them with the spring clips. Fit the top link, raise the machine to a
perpendicular position with the ground. Adjust the two tractor lower linkage stabilizers thus fixing the machine to
the tractor in a central position. Connect the hydraulic cylinders and check if it works.
Before transport put the machine in to the proper horizontal central position if this is RHD 160 (Figure 13). Flail
mowers RHD 190 and 225 are transported in a vertical position because of its total width (Figure 14).
Figure 13
Figure 14
