background image

SR85 REMOTE CONTROL CAR ALARM SYSTEM

3

SPARKRITE SR85

REMOTE CONTROL CAR ALARM SYSTEM

The Sparkrite SR85 compact remote control car alarm system incorporates the latest

“state of the art” microprocessor technology offering the ultimate in product reliability

and performance. The unique easy-fit design offers easy installation and ensures
many years of trouble free operation.

Table of Contents

OPERATING YOUR SR85 ALARM SYSTEM................................................................. 4
ARMING YOUR ALARM AND DOOR OPEN ALERT ..................................................... 4
DISARMING YOUR ALARM............................................................................................ 4
ENTRY ALERT AND REMOTE PANIC........................................................................... 4
FITTING INSTRUCTIONS............................................................................................... 5
VEHICLE WIRING TESTING .......................................................................................... 5
INSTALLATION NOTE ..................................................................................................... 5
MAKING RELIABLE CONNECTIONS (AND USING IDC CONNECTORS ................... 5/6
MOUNTING THE MAIN ALARM MODULE AND HARNESS LOCATION ..................... 6/7
SR85 WIRING CONNECTIONS........................................................................................ 7
ARMED INDICATOR LED AND PURPLE AND GREY WIRES-INDICATORS ................ 8
GREEN WIRE-ALARM ANTENNA.................................................................................... 8
YELLOW WIRE-ELECTRIC FAN INHIBIT ........................................................................ 9
BLUE WIRE-DOOR SWITCHES AND0 BLACK WIRE-EARTH ..................................... 10
RED WIRE-POWER SUPPLY CURRENT SENSING..................................................... 11
ORANGE/WHITE WIRE-CENTRAL LOCKING CONTROL ............................................ 11
BOOT AND BONNET SWITCHES .................................................................................. 12
SHOCK SENSOR ............................................................................................................ 12
TESTING THE ALARM INSTALLATION......................................................................... 13
TROUBLE SHOOTING GUIDE ....................................................................................... 16
ADDITIONAL REMOTE CONTROL TRANSMITTERS................................................... 17
TECHNICAL HELP AND PRODUCT APPROVALS ....................................................... 17
ACCESSORIES FOR THE SR85 ALARM ...................................................................... 17

Содержание SR85


















Отзывы: