SR85 REMOTE CONTROL CAR ALARM SYSTEM
13
TESTING THE ALARM INSTALLATION
1)
Check all connections are secure and the vehicle battery is connected.
2)
Press the remote control button. The alarm will arm with one chirp and one
flash of the indicators.
3)
Press the remote control button. The alarm will disarm with two chirps and
two flashes of the indicators.
4)
Arm the alarm. Wait approximately 20 seconds, open a door ensuring the
interior light operates. The alarm will trigger. Disarm the alarm. (Refer to
trouble shooting section if alarm fails to trigger).
5)
Repeat the arming procedure and trigger via shock sensor, disarm alarm.
6)
Test remote panic features by holding down the remote control button for 3
seconds. The alarm will trigger. Release button and press again to disarm
the alarm. If problems are encountered, refer to the trouble shooting guide
before proceeding further.
