SR85 REMOTE CONTROL CAR ALARM SYSTEM
16
CURRENT SENSING
Interior light failed to trigger alarm.
Check bulbs and that interior light switches
are set to come on when doors are opened.
Current sensing too insensitive.
Increase trigger sensitivity by relocating
the RED wire to an alternative 12V supply
further from the battery.
INDICATOR OUTPUT
When alarm is activated the indicators
Wiring faults or fuse blown in harness.
do not flash.
Check wiring and replace any blown fuses.
ALARM GIVES FALSE ALARMS
Bad earth or supply connection.
Check connection of BLACK earth wire.
Check connection of RED supply earth.
Post ignition electric’s
.
Check that your vehicle does not have
any electrical circuit operating when the
vehicle is parked i.e. Hazard lights,
radiator cooling fan etc.
Shock Sensor too sensitive.
Check and re-adjust shock sensor.
Current sensing too sensitive.
Decrease trigger sensitivity by relocating
the RED wire to an alternative 12V position
close to the battery.
Wiring fault.
Test operation of all switches and ensure all
triggering connections are secure and make
a good electrical contact.
ADDITIONAL REMOTE CONTROL TRANSMITTERS
Available from HALFORDS or Stadium Consumer Products at the following address:
STADIUM CONSUMER PRODUCTS
STADIUM NORTH
UNITS 8-11 TOFTS FARM
INDUSTRIAL ESTATE
BRENDA ROAD
HARTLEPOOL
CLEVELAND
TS25 2DH
TELEPHONE: 01429 862616
