SPAN L7535-29, Руководство пользователя

Страница: 12 / 32

12
P09564 R4 CO# 2340
which are interchangeable. Verify secure connection with two clicks. On the LR model (four fittings
mounted into one connection plate.) and XL (six fittings mounted into one connection plate) models,
click connectors into place in appropriate fittings on side of control unit. Verify secure connection
with “click” for both metal connectors.
- To disconnect: On standard unit, press silver release button located on each air line connector. On LR
and XL versions, use thumb and forefinger to press concurrently the
two silver release buttons located on the uppermost left and lowermost right connectors. This will
release and eject the air line connector plate.
!
Never thread air lines through mechanical parts of the bed or bed rails where raising, lowering,
or gatching of the bed may damage the air lines or the control unit itself. Check to be sure the
routing of the air lines or the motion of the bed does not impede air flow by crimping the air lines.
ELECTROMAGNETIC OR OTHER INTERFERENCE
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to other devices in the vicinity. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to other devices, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-
Reorient or relocate the receiving device.
-
Increase the separation between the equipment.
-
Connect the equipment into an outlet on a circuit different from that to which the other device(s)
are connected.
-
Consult the manufacturer for help.
Attaching support cylinder
connection plate on Easy Air LR
(model 8200)
Attaching support cylinder
connection plate
On Easy Air XL (model 8300)
Easy Air Standard Model
(model 8000)