Before operating the machine, it is required that the operator know the function of each operating control.
Mix Low Indicator
：
A mix level indicating light is located at the front of the machine. When the light is
“ON”, it indicates that the mix hopper has a low supply of mix and should be refilled as soon as possible.
Always maintain at least 2cm of mix in the hopper. If you neglect to add mix, a freeze
-
up may occur. This will
cause eventual damage to the beater assembly, the dispensing door, and gear box.
Display Screen
：
During normal operation the display is used to indicate function, the temperature of the
mix in the hopper and cylinder, the electric current of beater motor, error, and warning message.
Touch Switch Panel
：
To better communicate in the International arena, symbols have replace words on
many of your operator switches. SPACEMAN equipment is designed with these international symbols.
1
2
3
4
5
6
Turn on power
Press and hold RESET for 3 seconds to enter into Menu;
Press RESET to turn to next page
Machine Display Indicates
Press RESET button
to turn to STOP
mode
Press WASH button
to turn to WASH
mode
Press P button,
displays temperature
of Hopper & Cylinder
Press STANDBY
button to turn on
STANDBY mode
Press FREEZE button
to turn on FREEZE
Mode
Press ICE CREAM
button, screen displays
dispense count
Press P button
again, displays
motor current
Viscosity Setting
Hopper
Temperature
Date & Time
12
Operating Control :
Introduction
1.
FREEZE Button
2.
WASH Button
3.
STANDBY Button
4.
RESET Button
5.
ICE CREAM Button
6.
P Button
Auto Programming
Language
Mix Low
Indicator
Touch Switch
Panel
Display Screen
