Space-Ray SRP 08, Инструкция по установке, обслуживанию и эксплуатации, Страница: 3 / 26

Page 1 of 24
INSTALLATION, SERVICING AND OPERATING INSTRUCTIONS
Before installation, check that the local distribution conditions, nature of gas and pressure, and adjustment of appliance
are compatible.
INDEX
Section Title Page
1. Technical Data 2 - 4
2. Un-Packing 5
3. Installation 5 - 10
3.1 Suspension 5 - 6
3.2 Gas Supply 6 - 7
3.3 Electrical Supply 7 - 10
3.4 Ventilation 10
4. Assembly 10 - 11
4.1 Direct Burner Spark Ignition-SRP08/15/22/30 10 - 11
4.2 Direct Burner Spark Ignition-SRP30 Hi/Lo 11
4.3 Standing Pilot Ignition-SRP08/15/22 11
5. Commissioning 12 - 15
5.1 Direct Burner Spark Ignition 12 - 13
5.1.1 Ignition 12
5.1.2 Shut Down 12
5.1.3 Checking Gas Pressure 12 - 13
5.1.4 Flame Supervision 13
5.2 Standing Pilot Ignition 13
5.2.1 Ignition 13 - 14
5.2.2 Shut Down 14
5.2.3 Checking Gas Pressure 14 - 15
5.2.4 Flame Supervision 15
6. Servicing 15 - 17
6.1 Ignition Electrode 15
6.2 Flame Sensor Probe 16
6.3 Venturi Fabrication 16
6.4 Injector 16
6.5 Electrical Wiring 16
6.6 Reflector 16
6.7 Emitter Assembly (ceramic plaque) 16 - 17
6.8 Pilot Burner Frame (standing pilot ignition) 17
6.9 Pilot Injector (standing pilot ignition) 17
6.10 Re-assemble and Commission 17
6.11 Auxiliary Controls 17
7. Replacing Components 17 - 20
7.1 Ignition Electrode 17
7.2 Flame Sensor 17
7.3 Ignition Control 18
7.4 Injector 18
7.5 Pre-injector 18
7.6 Venturi Fabrication 18
7.7 Twin Solenoid Control Valve (spark ignition) 18
7.8 Millivolt Control Valve (pilot ignition) 18
7.9 Thermocouple (pilot ignition) 19
7.10 Thermopile (pilot ignition) 19
7.11 Pilot Injector (pilot ignition) 19
7.12 Pilot Burner Frame (pilot ignition) 19
7.13 Reverberatory Screen 19
7.14 Emitter Assembly 19 - 20
7.15 Replacement Parts List 20
8. Operating Instructions 20 - 21
8.1 Direct Burner Spark Ignition Models 20 - 21
8.2 Standing Pilot Ignition Models 21