Space-Ray CBU09, Инструкция по установке, обслуживанию и эксплуатации

Страница: 4 / 55

Form 483S
Rev Jan 09
Page 2 of 53
INSTALLATION, SERVICING & OPERATING INSTRUCTIONS
1. SAFETY
This heater is a self-contained overhead radiant tube heater designed for non-domestic use. Safety information
required during installation and operation of this heater is provided in this manual and the labels on the product.
The installation, service and maintenance of this heater must be performed by a contractor qualified in the
installation and service of gas fired heating equipment.
All personnel in contact with the heater must read, and understand, all safety information, instructions and labels
before operation. The following symbols will be used in this manual to indicate important safety information.
Warning instructions must be followed to prevent or avoid hazards which
may cause serious injury, property damage or death.
Caution instructions must be followed to prevent incorrect operation or
installation of the heater which may cause minor injury or property damage
2. INSTALLER RESPONSIBILITY
The installer is responsible for the following:
•
The heater and venting, as well as electrical and gas supplies must be installed in accordance with these
installation instructions and any applicable codes and regulations.
•
Every heater shall be located with respect to building construction and other equipment so as to permit access
to the heater.
•
Each installer must follow the clearances to combustibles materials for the heaters.
•
Install the heater so that the supports and hangers are correctly spaced in accordance with these instructions.
The heater must be supported by materials having a working load limit of at least 52kg.
•
Supply the owner with a copy of these Installation and Operation Instructions.
•
Never use the heater as a support for a ladder or other access equipment. Do not hang anything from the
heater.
•
Supply all installation materials necessary that are not included with the heater.