9
4). Time and Date:
Set Time and Date. Choose [Time and Date] and press [ENTER], the
screen will display the interface as shown below:
Press [UP] or [DOWN] to change input, press [LEFT] or [RIGHT] to select position, then
press [ENTER] to confirm.
5). Record:
ON/OFF the Record.
Choose [Record Mode] and press [ENTER], the screen will display the interface as shown
below:
Press [ENTER] to select ON/OFF and press [ESC] to confirm. When this function is ON,
and the icon record Data-stream and record Freeze Frames.
3.6 Vehicle Coverage
This model OBDII/EOBD Scanner is specially designed to work with all OBD II compliant
vehicles, including those equipped with next-generation protocol -- Control Area Network
(CAN). It is required by EPA that all 1996 and newer vehicles (cars and light trucks) sold in
the world must be OBD II compliant and this includes all America, Asian and European
vehicles.
Press [ENTER] to select ON/OFF and press [ESC] to confirm. When this function is ON,
and the icon record Data-stream and record Freeze Frames. A small number of 1994 and
1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995
vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label
which is located under the hood or by the radiator of most vehicles. If the vehicle is OBD II
compliant, the label will designate "OBDII Certified".
Additionally, Government regulations mandate that all OBDII compliant vehicles must have
a "common" sixteen-pin Data Link Connector (DLC). For your vehicle to be OBD II
compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the vehicle
Emission Control Information Label must state that the vehicle is OBD II compliant.
