18
4.2.7 On-board monitor test
This function can be utilized to read the results of on-board diagnostic monitoring tests for
specific components/systems. Select [On-board Monitoring] in main menu and press
[ENTER] and the screen will display as shown below:
You can use [UP] [DOWN] button to select an item and press [ENTER], the screen will
display as shown below:
Press [ESC] to return to Diagnostic Menu.
4.2.8 EVAP System Test
The EVAP test function lets you initiate a leak test for the vehicle system. The AUTO
SCANNER does not perform the leak test, but signals to vehicle function, refer to the
vehicle procedures necessary to stop the test. Select [EVAP System Test] and press
[ENTER], the screen will display the relative information about EVAP system. Some
vehicle manufacturers do not allow external devices to control vehicle system. If the car
supports this function, it will display as below:
Press [ESC] to return to Diagnostic
Menu.
