V130116
Illuminated Touch-panel
Access controller
Command List
Function
Command
Exposition
Lift control setting: multi-doors
21 UUUUU G LLLLLLLL
UUUUU
＝
user address
；
G=4 sets of lift control(0~3);
LLLLLLLL=8 assigned floor (F=0: Disable, 1: Enable)
AR-401RO16/ AR-401RO16B relay time setting
23 MMM TTT
MMM=Node ID of lift controller
TTT= relay time: 000~600=1~600 sec.
Factory setting
24 U DDD
U
＝
Enable target unit (0=AR-725(E-V2) , 1=WG Reader)
DDD
：
Function default value
Real time clock setting
25 YYMMDDHHMMSS
YYMMDDHHmmSS: Year/Month/Day/Hour/Min./Sec.
Anti-pass-back (Enable user)
26 SSSSS EEEEE P
SSSSS= starting user address; EEEEE= ending user address
P=0=Enable; P=1=Disable; P=2=Initial
Lift control setting: single door
27 UUUUU LL
UUUUU
＝
user address
；
LL
：
Floor number(01~64
fl
oor)
Duress Function and Arming output setting
28 FFF
Arming output and Duress function: FFF= 008 (default value)
Delete all tag
29 29
Same tag reading interval time
31 TTTT
Base on 10ms, range from 10 to 6000
Auto ring the clock alarm schedule
32 SS HHMMTT 7123456H
SS= 16 sets auto alarm schedule, range 0~15
HHMM= HH:MM (ex. 0830: Ring bell at 08:30)
TT=Period of time to ring bell
(Base on second, range 01~99 sec.)
7123456: 7 days of week -Sun/Mon/Tue/Wed/Thu/Fri/Sat
(Input value: 0=disable; 1=enable)
H: Holiday (Input value: 0=disable; 1=enable)
Holiday Setting
35 MMDD F
MM= Month of year (01=Jan...10=Oct.)
DD= Date of month (01=1st day of month)
F= 0:Delete ; 1: Add
Enabling or Disabling into Full Access status
36 MW
M=AR-725(E-V2); W=WG Reader (0=disable; 1=enable)
RS485 port function setting
(Needs to be restarted after setting)
37 AB
A
＝
0:AR401RO B
＝
0: 9600(default value)
1:Host (default value) 1: 19200
2:LED Panel 2: 38400
3:Printer
3: 57600
TTL port BAUD setting
38 DDD
DDD : 001
＝
4800 bps DDD : 065
＝
9600 bps
DDD : 129
＝
19200 bps
Function Default Value
20 U DDD
※
Default Value
Function
Option
Value Application
Time Attendance
※
0: Yes
1: No
001 Networking
Auto Re-lock
※
0: Disable
1: Enable
002 Networking/Stand-Alone
Auto Open
※
0: Disable
1: Enable
004 Networking/Stand-Alone
When Access Mode is "Card and PIN", Readers can skip pressing PIN code.
※
0: Disable
1: Enable
008 Networking/Stand-Alone
Exit by Push Button
0: Disable
※
1: Enable
016 Networking/Stand-Alone
Enable force Open
※
0: Slave
1: Mater
032 Networking
As Access/Exit Reader
※
0: Exit
1: Access
064 Networking
Anti-pass-back
※
0: Disable
1: Enable
128 Networking
※
U=Reader
(0=AR-725(E-V2), 1=WG)
；
DDD = Value
。
[e.g.]Setting AR-725 (E-V2) : Arming and PRN
→
(1x008)+(1x 048)=
056
Access programming mode
→
28 056
→
setting is completed
28 FFF
Function
Option
Value
Application
※
Default Value
Duress Function and Arming output setting
0:Wiegand output
Networking/Stand-Alone
008
※
1: Arming and Duress
※
HOST: 01
RS-485
401RO16B:00
000
016
Networking/Stand-Alone
Networking/Stand-Alone
Networking/Stand-Alone
PRN: 11
LED: 10
032
048
Expiry User Access Trigger Alarm
Auto Reset Anti-pass on TZ61
※
0:Disable
※
0:Disable
1:Enable
1:Enable
001
002
24 U DDD
※
Default Value
Function
Option
Value Application
Enable Egress Beep Sounds
※
0: Disable 1: Enable
001 Networking/Stand-Alone
Enable Arm/Disarm Zone(62)
※
0: Disable 1: Enable
008 Networking/Stand-Alone
Reader and controller share the same door relay (only for reader)
0: Disable
※
1: Enable
016 Networking/Stand-Alone
Free Access Mode
※
0: Disable 1: Enable
032 Networking/Stand-Alone
Stop Alarm by...
※
0: None
1: Push button/Door Closed 064 Networking/Stand-Alone
Open door immediately without 1st card presented at auto open zone
※
0: Disable 1: Enable
128 Networking/Stand-Alone
