V130116
Illuminated Touch-panel
Access controller
Enable device
Access programming mode
→
20 U DDD U= Enable target unit(0=AR-881EF/EV,1=Reader) [Please refer to function default value for details.]
[e.g.] If the
AR-881EF/EV
set to
exit reader
,
WG Reader
set to
access reader
.
Access programming mode
→
20 0 128
→
20 1 192 [Please refer to function default value for details.]
Enable/Disable auto open zone
Access programming mode
→
20 U DDD U= Enable target unit(0=AR-725(E-V2),1=Reader) [Please refer to function default value for details.]
[e.g.] If the
AR-725 (E-V2)
set to
Enable aut open zone
.
Access programming mode
→
20 0 004 [Please refer to function default value for details.]
[e.g.] If the
WG Reader
set to
Enable aut open door without presenting card
.
Access programming mode
→
24 1 128 [Please refer to function default value for details.]
Enable/Disable auto open door without presenting card
Access programming mode
→
24 U DDD U= Enable target unit(0=AR-725(E-V2),1=Reader) [Please refer to function default value for details.]
[e.g.] User address from 00152 to 00684 enable the anti-pass-back function:
26 00152 00684 0
Enable card user
Access programming mode
→
26 SSSSS EEEEE P
SSSSS= starting user address; EEEEE= ending user address [P=0 Enable/ P=1 Disable/ P=2 Reset]
[e.g.]AR-725 (E-V2) (
without WG reader
), to set second time zone which could be passed only at 9:30am to 4:20pm on Mon, Wed and Fri.
Access programming mode
→
08 10 01 09301620 01010100
→
setting is completed
Setting up access time
Access programming mode
→
08 MW NN HHMMhhmm 7123456H [M=AR-725 (E-V2); W=Reader(0=disable,1=enable); NN: 16 sets of
auto-open zone (NN=00~15); HHMMhhmm=Starting time to ending time; 7123456H= 7 days of week + Holiday (F= 0: disable; 1: enable)]
Usually, anti-pass-back is commonly applied to parking areas in order to prevent from multi-entry with one card at a time, or somewhere wants to
monitor not only the access but also exit condition.
Door will keep opening after first man flashing card. When the reader is stand-alone, supporting only 16 sets of auto-open zone by device setting.
Auto-open zone can extend up to unlimited sets by Networking.
E. Anti-pass-back
F. Auto Open Zone
Access programming mode
→
00 NNN MMM AAA
[NNN= Node ID: 000~254; MMM=AR-725 (E-V2) Door NO.:1~255; AAA=WG Reader Door NO.:1~255
B. Changing the Node ID of Reader
C.Setting up the control mode (M4/M8)
D. Setting up the password
Access programming mode
→
04 N [N=4/8]
Individual PWD (M4/M8)
Card or PIN:
Access programming mode
→
12 UUUUU PPPP [e.g. User address: 00001 and PWD: 1234. Input 12 00001 1234 ]
Card and PIN:
Access programming mode
→
13 UUUUU PPPP [e.g. User address: 00001 and PWD: 1234. Input 13 00001 1234 ]
Mode Support
Networking/
Stand-Alone
Networking/
Stand-Alone
User
Capacity
Access Mode
M4
M8
V
V
V
V
V
V
64
64
unlimited
unlimited
32,000
32,000
16,000
(0~15,999)
16,000
(0~15,999)
Event
Capacity
120
Holidays Duress
Time
Zone
Lift
Control
Anti-pass-
back
1.Card only
2.Card and PIN
(4-digit PIN)
3.Card or User address
(5-digit)
+ Individual PIN
(4-digit individual PIN)
1.Card only
2.Card and PIN
(4-digit individual PIN)
3.Card or PIN
(4-digit individual PIN)
Changing the Master Code
Access programming mode
→
09 PPPPPPRRRRRR [Input the 6-digit new master code twice.]
[e.g.] If want to changing the Master Code= 876112, input
123456
→
09 876112876112
Exiting
Input
Programming
A. Entering and Exiting Programming Mode
Entering
Input 123456 or PPPPPP
[e.g.] The Default Value= 123456, if already changed the Master Code= 876112, input
876112
→
Access programming mode
Delete All Tags
Input 123456 (or Master Code)
→
29 29
Delete a batch of Tags
Input 123456 (or Master Code)
→
10 SSSSS EEEEE
[e.g.] Delete User Address: 00101~00245
Access programming mode
→
10 00101 00245
9
9
