Sovema PL 180, Руководство по эксплуатации и обслуживанию

Страница: 14 / 43

OPERATION & MAINTENANCE MANUAL Revision 2022
_____________________________________________________________________________________
III.C - 2/3
5. When the PTO drive shaft has completely stopped, turn off the engine, engage the
parking brake and remove the ignition key
6. Get off the tractor and place support stands in a rest position by using the supplied
pins. The support stands must be always on the implement, so that can be always
available
7. Connect the PTO drive shaft to the implement
8. Connect the PTO drive shaft to the tractor. If the shaft is too long you have to
shorten it, please refer to the instructions on the next page
9. (if present) Connect implement hydraulic hoses to the tractor distributor
10. Get on the tractor, insert the ignition key and turn on the engine
11. Lower the implement and adjust it so that it is parallel to the ground. Do this by
adjusting the tractor top link (see Fig. 2). This will improve the life-span of the
implement and the PTO shaft
Figure 2
Always check that the tractor PTO is in neutral position before connecting the
PTO drive shaft!
NOTE ON THE PTO DRIVE SHAFT
Always refer to the manufacturer’s instructions manual. Read it carefully !