Sovema PL 180, Руководство по эксплуатации и обслуживанию

Страница: 27 / 43

OPERATION & MAINTENANCE MANUAL Revision 2022
_____________________________________________________________________________________
V - 4/4
EVERY 50 WORKING HOURS

Proceed greasing rear roller’s lateral supports. Before greasing, clean the grease nipple
correctly to avoid the entrance of dirt, grass and mud. Use lithium-based grease with
NLGI grade of 2
FIRST 100 WORKING HOURS

When the implement has done its first 100 hours, change the oil from the gearbox. To
proceed, remove the plug located under the box, place a container underneath the drain
hole, drain all the oil through the discharging hole, then fill in with new oil through the filler
hole. This substitution is necessary because the gears are new and so are subject to
quicker wear. The recommended quantity is approx 1,2 L (0,31 US gal/ 0,26 UK gal). Use
ISO VG 320 oil only. For the disposal of oil, refer to “7 - disposal & recycling” section
EVERY 300 WORKING HOURS

Completely change the oil in the gearbox proceeding as described above. Use ISO VG
320 mineral oil only. For the disposal of oil, refer to “7 - DISPOSAL & RECYCLING”
section
HYDRAULIC SYSTEM
Hydraulic hoses must be replaced when cracks or sign of deterioration are visible
Work on hydraulic system must only be performed if the hydraulic system is
depressurized
If you need to replace missing, wear or damaged parts, please always
refer to the spare parts catalogue attached to this manual.
The spare parts to be used must meet the technical requirements
specified by SOVEMA. This is always ensured with original spare
parts.