Southworth DANDY LIFT страница 7 Скачать руководство пользователя

Страница: 7 / 65

NEW STYLE DANDY LIFT OWNER'S MANUAL

GENERAL INFORMATION & OPERATION

UDL-150, UDL-250, UDA-350W, UDA-500, UDA-800

A.The lift is packed in a cardboard box. Assembling of the handle with lift-lowering lever and

jack up pedal is required.

WARNING:

Assembly work must be done a on a flat surface.

Wheels must be chocked to prevent accidental rolling of the unit.

To complete assembly of the lift:

1. Remove nuts and spring washers from the end of handle and insert the handle and

lowering lever rod simultaneously into hole on platform and frame. If rod end of lower-

ing lever slips out of the connecting sleeve or wedge of rod end does not hold in the

connecting sleeve, adjustment may be required. Tighten handle and lowering lever

using removed nuts and washers.

B. If air enters the hydraulic pump during transportation or in storage, lift may not raise even

when the pedal is first pumped. In this case, place the unit in the normal position and push

the pedal all the way down (approximately ten times). This should clear the trapped air from

the self-bleeding system. Check to see that the jack is functioning properly.

C. Parking brake (floor lock) will require adjustment. Adjust the contact shoe so that you can

see it make contact with the floor with some force and then make sure it can still be released

without difficulty.

Содержание DANDY LIFT


































































Результаты поиска

Содержание DANDY LIFT

Отзывы:

Похожие инструкции для DANDY LIFT

Бренды по названию

Популярные бренды

Southworth DANDY LIFT, Руководство пользователя

Результаты поиска

Содержание DANDY LIFT

Отзывы:

Похожие инструкции для DANDY LIFT

Бренды по названию

Популярные бренды