manualshive.com logo in svg

Southworth DANDY LIFT, Руководство пользователя

Поделиться
Скачать
Southworth DANDY LIFT Скачать руководство пользователя страница 31

6

PRIOR TO OPERATING THE LIFT: 

The Dandy Lift is designed to provide safe operation.  By following these safety rules, 
the operator will avoid injury to him/her self or others and also damage to the Dandy 
Lift, other equipment or structures. 

In order to ensure safe and efficient use, the operator should fully familiarize himself 
with the contents of this manual prior to handling the unit.  Also refer to any 
precautionary labeling on the machine for guidance as you do the work. 

WARNING 

1. Keep non-authorized personnel away from the unit during operation.

2. Do not sit, stand or ride on the tabletop.

3. Do not load with more than the rated capacity.

4. Avoid any protrusion beyond the edge of the platform; load should always be centered.

5. Keep hands or feet clear at all times.

6. Avoid rapid lowering of the platform while loaded.

7. The platform must be lowered when the unit is being transported.

8. During the loading/unloading operation, do not release parking brake.

9. Do not raise/lower the platform on a sloped or uneven surface.

For safe and efficient use of the unit, lubrication and servicing is necessary.  At initial 
start up, lubricate all required parts in accordance with lubrication section. 

Maintenance and adjustment work must be performed while lift is not loaded, and use 
an appropriate support to avoid accidental lowering. This support is always 
recommended when working on a lift. 

Содержание DANDY LIFT


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды