Description
The Triggers
®
dual remote foot pedal system is designed for power
control and safety for all your cable pulling and feeding applications.
The person operating the puller and the person feeding the wire both
have control over the puller’s motor. The hand held units serve a dual
purpose. First, they allow a safety observer to shut down the puller’s
motor in the event of an emergency. Secondly, they act as a range
extender for the system. All of this is accomplished by simply press-
ing down or lifting off the Triggers foot pedal. Both foot pedals must
be engaged in order for the puller motor to operate. Any time either
foot pedal is released or the stop button on the hand held unit is
pressed the puller motor will stop. The Triggers Master and Remote
units may also be used as standalone foot pedals if desired, requiring
only one operator to run the cable puller or feeder’s motor.
Communication between units is wireless. Triggers
®
foot switches will
continue communication up to 1500 feet between walls and obstruc-
tions and up to 1.5 miles line of sight. With the addition of Hand Held
units, this range can be extended over greater distances. The Triggers
units are equipped with a series of lights indicating the units are in
range or that one pedal is depressed and the other is not. This helps
to decrease the chance of miscommunication during a wire pull.
