W
ENDY
’
S
G
AS
R
ANGE
I
NSTALLATION
O
WNER
’
S
M
ANUAL
1195747
P
AGE
11
IN
S
T
A
L
L
A
T
IO
N
Step 3: Installation of Restraint (Only for Units with Casters)
All units ordered with casters are supplied with a restraint kit.
NOTICE
For an appliance equipped with casters, (1) the installation shall be made with a connector that
complies with the
Standard for Connectors for Movable Gas Appliances, ANSI Z21.69
or
Connectors
for Moveable Gas Appliances, CAN/CGA-6.16,
and a quick-disconnect device that complies with the
Standard for Quick-Disconnect Devices for Use With Gas Fuel, ANSI Z21.41,
or
Quick Disconnect
Devices for Use with Gas Fuel, CAN1-6.9,
(2) adequate means must be provided to limit the
movement of the appliance without depending on the connector and the quick-disconnect device or
its associated piping to limit the appliance movement and (3) the restraining means should be
attached to a frame member on the back of the unit.
WARNING
TO AVOID ACCIDENTAL GAS DISCONNECTION AND POTENTIAL EXPLOSION:
If disconnection of this restraint is necessary to move the appliance for cleaning, etc., reconnect it
when the appliance is moved to its originally installed position.
1. Secure the restraining-device bracket (item “B” in the following illustration) to a wall stud located as
close as possible to the appliance connector inlet and outlet connections. Use four #12 screws (items
“C”) and plastic anchors (items “A”) if necessary.
E
D
A
C
B
G
F
I
H
