Southbend KECT-05F, Руководство пользователя

Страница: 3 / 27

INTRODUCTION
Section 1: SELF-GENERATING COUNTER TOP
STEAM JACKETED KETTLES
DESCRIPTION
All CROWN electrically powered kettles described and referred to in this manual are
pressure vessels of a double-wall stainless steel construction forming a sealed
jacket (chamber) enveloping the tower two thirds of the kettle bowl surface.
The kettle bowl is the container for the food product which ideally should be of a
liquid or semi-liquid consistency to achieve complete contact with the bowl surface
and thus fully absorb the heat transmitted through that surface from the pressurized
steam generated in the kettle jacket.
The jacket is intended to function as a self contained sealed chamber with a
permanent solution of water and anti-freeze sufficient not only to immerse and
thereby protect replaceable electric heating elements but also provide the steam
source during the steam generating process.
The heating elements are thermostatically dial controlled to provide precise
temperatures throughout the range from slow simmer to rolling boil.
Each kettle is rigidly suspended on a horizontal shaft which is supported by, and
allowed to rotate within the console housing thereby making it possible to tilt the
kettle.
Removal of the food product occurs when the kettle is tilted and contents are
directed by the pouring lip into an appropriate container.
All models are intended for permanent mounting to a counter top or suitable
stand.
CAPACITIES
All EC models are suffixed with either -5, -6, -10 or -20 to indicate the capacity of
that kettle in U.S. Gallons. Thus an EC-5 indicates an electric self steam
generating jacketed counter top kettle with a capacity of 5 gallons (U.S.).
FUNCTIONING MODE
All CROWN electrically powered self steam generating kettles consist of a jacket
containing a permanent solution of water and anti-freeze sufficient to completely
immerse and protect replaceable electric heating elements. A low water sensing
probe, as a protective device, is installed in each kettle jacket which will
automatically interrupt heating element operation and turn on the WATER REQUIRED
warning light whenever water level is insufficient to immerse not only the probe but
also the elements.