GALAXY G7
- 26 -
2, open the same function for Rover in critical status (when the Rover is close to working distance
of Base internal UHF).
3, configure the datalink of the other rovers into internal UHF mode, then make sure the channel,
protocol and frequency point are same as “Repeater” rover.
Note: please take in mind that the “Repeater” rover should keep away from Base station to avoid
signal interference.
RTK Record:
This is used to enable raw data recording in base mode or rover mode for
post-processing
1 PPS:
This option is for the 1 pulse per second output
EVENT:
This option is for the EVENT marker input
EVENT Polarity:
EVENT input method.
Base Setup
When GALAXY G7 works as a base, the basic configuration for base can be setup in this page.
Users can input the correct coordinates or capture a current position for the base. Also users can
define what kind of correction format is transmitted.
