GALAXY G7
- 13 -
➢
Sensors checking
➢
WiFi module checking
➢
Bluetooth module checking
➢
EPPROM checking
If all the modules are normal during self-check, the instrument will get into the state of power-on.
§3.6 USB mode setting
Press and hold the power button for about 15 seconds and pass over the foregoing states (power
off, mode selection, self-check), G7 will get into USB mode setting with voice message saying
“start to set USB mode”, at this moment, release power button, the instrument repeats “ USB
disk” and “ USB network interface” for optional, choose the proper mode and press power button
to confirm.
USB disk
USB network interface
OEM board self-check status
UHF self-check status
