GALAXY G7
- 16 -
§4.3 Access by USB
On this mode, the 7-pins USB port of GALAXY G7 must work as an Ethernet port, then internal
web UI shall be accessed via USB cable connection with computer.
First of all, a corresponding driver is required to install to the computer, then this function could
be activated.
Due to different operating system is installed on computer, the drivers should be applied to a
suitable one. The file
bugvista64.inf
is applied to 64bit operating system, and
linux.inf
is for 32bit
operating system.
Make sure that the USB port is switched into USB network interface (please refer to section 3.5,
USB mode setting).
IP Address: 10.1.1.1
Username: admin
Password: admin
