GALAXY G7
- 12 -
Static
Press and hold the power button for about 5 seconds and pass over the state of power off (do not
release the button even the instrument says power off), then G7 will say “start to set work mode”,
at this moment, release power button, the working mode will be repeated from Rover to Static on
control panel. When the
Satellite
indicator glows in red accompany with “Static” voice message,
press the power button to confirm.
After that, press the power button for once to make sure if the working mode is correctly setup.
§3.5 Self-check
Self-check is an useful operation to simply check the main hardware components if the instrument
is abnormal or not working properly.
Press and hold the power button for about 10 seconds and pass over the state of power off and
mode selection (do not release the button even the instrument says power off and start to set work
mode), then G7 will say “start to self-check”, at this moment, release power button, the
instrument will perform self-check automatically for the modules one by one.
The sequence of modules checking is:
➢
OEM board checking
➢
UHF module checking
