O&M Manual v2
Page 9
Any MODIFICATIONS made by the customer without the consent of South-Tek
Systems will void the product purity and output specifications.
1.5
Warranty
The Nitrogen Generator, excluding the air supply system, is warranted against defects in materials and
workmanship, under normal use and operation, as applicable in the warranty listed below. All compressors,
booster, dryers, and/or other 3
rd
party equipment are covered by their original equipment manufacturer's
warranty.
The South-Tek Systems’ Warranty includes the following:
Free repair or replacement of component parts where defects occur within the first twelve (12) months of
operation or twelve (12) months from the date of invoice, whichever comes first.
These warranties shall be null, void, inoperative, and not binding upon South-Tek Systems if a defect or
malfunction occurs in the product or any part thereof from any
feed air malfunction, or improper filter
element maintenance,
or repair, attempted repair, adjustment or servicing by anyone other than an authorized
representative of South-Tek Systems,
or external causes.
Said warranty shall extend and apply to the
Nitrogen Generator only while said system is owned and used exclusively by the original purchaser.
NOTE
THERE ARE NO EXPRESS WARRANTIES BY South-Tek Systems, OTHER THAN THOSE
SPECIFIED HERE. NO WARRANTY OF TITLE AS PROVIDED IN THE UNIFORM,
COMMERCIAL CODE SHALL BE IMPLIED OR OTHERWISE CREATED UNDER THE
UNIFORM COMMERCIAL CODE, INCLUDING BUT NOT LIMITED TO WARRANTY OF
MERCHANTABILITY AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
1.6
Service Return Policy
If it is necessary to return a system for service, follow the procedure given below. This procedure
must
be
followed when returning a system for service.
If the system cannot be repaired at the site, then the owner must obtain a written
Return Material
Authorization
number
,
which references the model and serial number, from South-Tek Systems.
No items will be accepted for service or credit unless prior written authorization has been issued by
South-Tek Systems.
All items are to be returned with the original packaging material if possible. Make sure that all items
are packaged for safe return to South-Tek Systems. South-Tek Systems will not be responsible for
damages, which occur in transit. Any damage that occurs to the system because of failure to adhere
to this procedure will be the sole responsibility of the customer. Contact South-Tek Systems for a
return shipping address.
Shipping charges must be prepaid on all returns.
