background image

 FPS-650 and FPS-1250                                                                                                                 South-Tek Systems        

Version:

 7    

Revision Date: 9/6/19    

                                                                                                                              

Page 26 of 29 

APPENDIX A: WARRANTY 
 

The  FPS-650  and  FPS-1250  System  is  warrantied  against  any  defects  in 
workmanship  and  materials  for  12  months  (or  1000  hours)  from  the  date  of 
shipment from South-Tek Systems, whichever comes first.  The purchaser has the 
liability to ensure that the system is fully inspected upon delivery and shall contact 
the appropriate shipping company to make any claims on damaged goods due to 
transit  within  that  shipping  company’s  policies.    If  the  system  is  received  with 
defects that are not due to shipping, a written claim should be submitted to South-
Tek Systems within 1 week of receiving the shipment.  South-Tek Systems can 
deny all other claims at their discretion. 
 
All warranty work shall be done at a South-Tek System facility or at a FPS-650 and 
FPS-1250  Authorized  Service  Center.  Only  factory  trained  and  authorized 
personnel  are  covered  under  warranty.  Any  part  that  is  returned  /  repaired  / 
replaced  under  warranty  may  be  remanufactured  or  changed  to  a  different 
specification  at  the  factory’s  option.  Any  work  performed  by  an  unauthorized 
person/company  or  usage  of  non-factory  parts,  may  void  all  warranties  to  the 
product.  

 

 
Any  item  not  manufactured  by  South-Tek  may  carry  its  own  warranty  from  its 
manufacturer and will be warrantied by that manufacturer.  All parts that need to 
be  returned  should  be  announced.    Any  item(s)  that  is  returned  to  South-Tek 
Systems  without  an  RMA  number  (return  authorization  number) may  be  denied 
and  returned  to  the  sender.    Contact  the  factory  for  RMA  #’s,  prior  to  return 
shipment. 
 
South-Tek  Systems  is  not  liable  for  damages  caused  by  normal  wear  and  tear, 
water, fire, erosion, corrosion, explosion, misuse, oil/gas vapors or unauthorized 
modifications.  South-Tek Systems is also not liable for any losses (including CO

2

), 

damages, or cost of delays, including incidental or consequential damages.  There 
are no warranties or guarantees, expressed or implied, including the warranties of 
merchantability  or  fitness  for  a  particular  purpose  or  use,  other  than  those 
warranties expressed herein.   
 
For Claims, contact South-Tek Systems, LLC. at: 

Tel: (888) 526-6284    Fax: (910) 332-4178 
Email

[email protected]

 

Or write to: 
South-Tek Systems, Warranty Claims, 2940 Orville Wright Way, Wilmington, 
NC 28405 

Содержание N2Blast FPS-1250






























Отзывы: