background image

 

 

                                                                                                      South-Tek Systems 

Version:

 0

 

Revision Date: 6/29/18

                                                                                                           

Page 16 of 18 

APPENDIX A: WARRANTY 

The 

BrewBlast™  110CPH

  System  is  warrantied  against  any  defects  in 

workmanship  and  materials  for  12  months  (or  1000  hours)  from  the  date  of 
shipment  from  South-Tek  Systems,  whichever  comes  first.    The  purchaser  has 
the  liability  to  ensure  that  the  system  is  fully  inspected  upon  delivery  and  shall 
contact  the  appropriate  shipping  company  to  make  any  claims  on  damaged 

goods  due  to  transit  within  that  shipping  company’s  policies.    If  the  system  is 

received  with  defects  that  are  not  due  to  shipping,  a  written  claim  should  be 
submitted to South-Tek Systems within 1 week of receiving the shipment.  South-
Tek Systems can deny all other claims at their discretion. 
 
All warranty work shall be done at a South-Tek System facility or at a 

BrewBlast™ 

110CPH  Authorized  Service  Center.  Only  factory  trained  and  authorized 
personnel  are  covered  under  warranty.  Any  part  that  is  returned  /  repaired  / 
replaced  under  warranty  may  be  remanufactured  or  changed  to  a  different 
specific

ation  at  the  factory’s  option. 

Any  work  performed  by  an  unauthorized 

person/company  or  usage  of  non-factory  parts,  may  void  all  warranties  to  the 
product.  

 

 
Any  item  not  manufactured  by  South-Tek  may  carry  its  own  warranty  from  its 
manufacturer and will be warrantied by that manufacturer.  All parts that need to 
be  returned  should  be  announced.    Any  item(s)  that  is  returned  to  South-Tek 
Systems without an RMA number (return authorization number)  may  be denied 

and  returned  to  the  sender.    Contact  the  factory  for  RMA  #’s,  prior  to  return 

shipment. 
 
South-Tek  Systems  is  not  liable  for  damages  caused  by  normal  wear  and  tear, 
water, fire, erosion, corrosion, explosion, misuse, oil/gas vapors or unauthorized 
modifications.  South-Tek Systems is also not liable for any losses, damages, or 
cost  of  delays,  including  incidental  or  consequential  damages.    There  are  no 
warranties  or  guarantees,  expressed  or  implied,  including  the  warranties  of 
merchantability  or  fitness  for  a  particular  purpose  or  use,  other  than  those 
warranties expressed herein.   
 
For Claims, contact South-Tek Systems LLC at: 

Tel: (888) 526-6284    
Fax: (910) 332-4178  
Email

[email protected]

 

Or write to: 
South-Tek Systems, Warranty Claims,  
2940 Orville Wright Way,  

Содержание BREW BLAST 110CPH



















Отзывы: