South bend SB1091 Скачать руководство пользователя страница 59

Страница: 59 / 60

Warranty

This quality product is warranted by South Bend Tools to the original buyer for 2 years from the

date of purchase. This warranty does not apply to consumable parts, or defects due to any kind of

misuse, abuse, negligence, accidents, repairs, alterations or lack of maintenance. We do not reimburse

for third party repairs. In no event shall we be liable for death, injuries to persons or property, or for

incidental, contingent, special or consequential damages arising from the use of our products.

We do not warrant or represent that this machine complies with the provisions of any law, act,

code, regulation, or standard of any domestic or foreign government, industry, or authority. In no

event shall South Bend’s liability under this warranty exceed the original purchase price paid for

this machine. Any legal actions brought against South Bend Tools shall be tried in the State of

Washington, County of Whatcom.

This is the sole written warranty for this machine. Any and all warranties that may be implied by

law, including any merchantability or fitness, for any purpose, are hereby limited to the duration of

this warranty.

Thank you for your business and continued support.

To take advantage of this warranty, register at https://www.grizzly.com/forms/warranty, or you

can scan the QR code below to be automatically directed to our warranty registration page. Enter all

applicable information for the product.

WARRANTY

southbendtools.com

Содержание SB1091





























































Результаты поиска

Содержание SB1091

Отзывы:

Похожие инструкции для SB1091

Бренды по названию

Популярные бренды

South bend SB1091, Руководство пользователя

Результаты поиска

Содержание SB1091

Отзывы:

Похожие инструкции для SB1091

Бренды по названию

Популярные бренды