South bend SB1091, Руководство пользователя

Страница: 24 / 60

To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
The purpose of this overview is to provide
the novice machine operator with a basic
understanding of how the machine is used during
operation, so they can more easily understand
the controls discussed later in this manual.
Note: Due to the generic nature of this overview,
it is not intended to be an instructional guide
for performing actual machine operations.
To learn more about specific operations and
machining techniques, seek training from people
experienced with this type of machine, and do
additional research outside of this manual by
reading "how-to" books, trade magazines, or
websites.
To reduce risk of eye injury
from flying chips or lung
damage from breathing dust,
always wear safety glasses
and a respirator when
operating this machine.
-22-
For Machines Mfd. Since 10/20
South Bend Tools
Model SB1091
O P E R A T I O N
Operation Overview
To complete a typical operation, the operator
does the following:
1. Examines workpiece to verify it is safe and
suitable for cutting.
2. Adjusts fence for width of workpiece and
locks it in place.
3. Adjusts fence tilt, if necessary.
4. Adjusts infeed table height to set depth of
cut per pass.
5. Puts on safety glasses, respirator, and any
other required protective equipment.
6. Starts jointer.
7. Using push blocks as needed, holds
workpiece firmly against infeed table and
fence, and feeds workpiece into cutterhead
at a steady and controlled rate until entire
length of workpiece has been cut and it
clears the cutterhead on the outfeed table
side.
8. Repeats cutting process described above
until desired results are achieved.
9. Stops jointer.