ST2883 Series Operation Manual Chapter 5 Introduction to [SETUP]
5-9
Press .CSV, the file will be save as .CSV file. If the file name is not input, the file will
be named as the default name FILExxx. CSV (xxx ranges from 001 to 999.).
Note: Users are recommended to use self-defined folder name. The default name ranges
from FOLDER001 to FOLDER 099.
Load
Load a file saved in an external U disk. Using the arrow key or the roller can choose the desired
file. Press Load. If the selected external file is needed to load to the internal RAM, press YES,
otherwise NO.
Note: Although the instrument supports three file formats, .STA, .TXT and CSV,
only .STA file can be loaded to internal RAM.
Delete Delete saved files. Press Delete. Then choose YES to delete the file, otherwise NO to cancel the
delete operation.
Copy to I: Copy external files (in U disk) to internal file list. Using the arrow key or the roller can select
the desired file. If the selected file is needed to copy to the internal file list, press Copy to I: and
then choose YES, otherwise choosing NO to give up this operation. Press ENTER to end coping.
In numeric input state, press ESC to exit from this page.
Lighten this key to enable the numerical arrow key. Respectively press 8, 2, 4, 6, the cursor will move
up, down, left and right.
