ST2883 Series Operation Manual Chapter 5 Introduction to [SETUP]
5-8
5.4 Ext. File
Figure 5-3 shows the page of external file.
Figure 5-3 External file
The set parameters can be saved to a U disk (external file) in file format. External file storage supports three
extension names: .STA, .TXT, .CSV. Only .STA file has file load function. Soft keys in the external file page
are as follows:
Sub Dir
Enter the sub-directory. Using the arrow key or the roller to choose a file, press Sub Dir to
enter the sub-directory.
Note
：
When the cursor is locating in the folder zone, pressing the roller down will
also enter the sub-directory.
Parent Dir
Return to the parent directory.
Create
Create a new folder. Press Create and then input the name of the file folder. End the creation
of new folder by press ENTER. If user presses ENTER without inputting the folder name,
the folder will be named as the default name-<FOLDERxx> (xx is a number ranging from
01 to 99.). Pressing ESC can exit the operation of creating. Letters from A to Z, numbers
from 0 to 9, and underline, etc. can be used for a file name.
Note: Users are recommended to use self-defined folder name. The default name
ranges from FOLDER01 to FOLDER 99.
Save
Press this key to save a file. Move the arrow key to choose the catalog storing the file. Press
the Save soft key and then enter the file name.
Press ENTER to end this operation. If the ENTER button is pressed without inputting the
file name, the default name is FILExxx.STA (xxx ranges from 001 to 999.).
Press . , soft keys .STA, .TXT and .CSV will be displayed in the soft key zone.
Press .STA, the file will be save as .STA file. If the file name is not input, the file will
be named as the default name FILExxx. STA (xxx ranges from 001 to 999.).
Press .TXT, the file will be save as .TXT file. If the file name is not input, the file will
be named as the default name FILExxx. TXT (xxx ranges from 001 to 999.).
