Sourcetronic MD-5060 Series, Руководство пользователя

Страница: 17 / 32

19
Permanent green The charging process has been successfully finished.
Battery OK.
Flashing green The charging process has finished, nevertheless the
battery hasn’t received the complete charge.
At the end of battery useful life, the battery must be recycled or
disposed of properly, in order to protect the environment.
The rechargeable battery does not show the “memory effect” and there are no
restrictions to start charging it as many times as is needed. However the battery
could be damaged if remains in deep discharge for a while.
To avoid this effect, charge the battery before left the equipment in storage and
don’t let pass more than 30 days without recharge, even if the instrument wasn’t
used (under storage, the battery loses part of its charge).
5. Step by step instructions
Check if there is no differences of potential voltage between the points
where the equipment shall will be connected to, nor between them and
the ground.
1. Connect the red security terminal (red cable) to the insulation tester
(-V) output terminal (see figure).
2. Connect BNC terminal to the
ZERO REFERENCE (+R) terminal and
the terminals to the element to be measured as indicated in the figure
below.