Sourcetronic MD-5060 Series, Руководство пользователя

Страница: 11 / 32

13
3.1. Test voltage
The or key enable the test voltage programming mode. Whenever the
equipment is turned-on, the key will be selected by default.
:: Enables test voltage adjustments in 100 V steps.
:: Enables test voltage adjustments in 500 V steps.
Pre-set voltages
Fast selection keys for pre-set test voltages.
:: Selects 500 V voltage.
:: Selects 1 kV voltage.
:: Selects 2.5 kV voltage.
:: Selects 5 kV voltage.
To operate them it is necessary that one of the keys or is selected.
Increase / Decrease test voltage
:: Increases the present test voltage in 500 V or 100 V steps.
:: Decreases the test voltage in 500 V or 100 V steps.
To operate them it is necessary that one of the keys or is selected.
3.2. OP. MODE
The key makes it possible to select the equipment operation mode, the
test type or its duration. The possible operation modes are:
Normal Mode
Resistance measurement test with unique voltage, without time limit.