background image

Soundstream Technologies (Soundstream), guarantees to the original purchaser to repair or replace with 
a comparable reconditioned model any Tarantula control module excluding without limitation any other
accessories, including but not limited to the antenna, remote, siren and wiring harness which prove to be
defective in workmanship or material under reasonable use during the lifetime of the vehicle it was 
originally installed, provided the following conditions have been met: the module was professionally 
installed and/or serviced by an authorized Tarantula dealer; the unit will be professionally reinstalled in the 
vehicle in which it was originally installed by an authorized Tarantula dealer; the warranty information card 
was sent to Soundstream within 10 days of the original installation date. Any warranty returns must include 
a return authorization number (RMA), the original receipt and be pre-paid shipping directly to
Soundstream. After an initial period of 2 years from the original date of installation, Soundstream reserves 
the right, at its sole discretion, to charge a warranty processing fee of $30.00 USD. Soundstream does not 
cover the cost for return freight on warranty items. This cost is the sole responsibility of the purchaser.

All components included with the original packaged unit other than the module, including but not limited to 
the siren, antenna and remote transmitters, carry a 1 year warranty from the original purchase date. Any
warranty returns on components must also include a return authorization number (RMA), the original 
receipt and be pre-paid shipping directly to Soundstream. This warranty is non-transferable and will be 
automatically void if: the original purchaser has not completed the warranty card and mailed it in within 10 
days of the original date of purchase to the address listed on the card; the unit’s date code or serial 
number is defaced, missing or altered in any way; the unit has been modified or used in a manner contrary 
to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect, improper 
service or installation or other causes not arising out of defects in materials or construction. The warranty 
does not cover damage to the unit caused by improper installation or removal. Soundstream, at its sole 
discretion, will determine what constitutes excessive damage and may refuse the return of any unit with 
excessive damage, including but not limited to, overloading, moisture and/or physical damage.

To the maximum extent allowed by law, any and all warranties are excluded by the manufacture and each
entity participating in the stream of commerce therewith. This exclusion includes but is not limited to, the
exclusion of any and all warranty of merchantability and/or any and all warranty of fitness for a particular
purpose and/or any and all warranty of non-infringement or patents, in the United States of America and/or
abroad. Neither the manufacture nor any entities connected therewith shall be responsible or liable for any
damages whatsoever, including but not limited to, any consequential damages, incidental damages,
damages for loss of time, loss of earnings, commercial loss, loss of economic opportunity and the like.
Notwithstanding the above mentioned, the manufacture does not offer a limited warranty to replace or 
repair the control module as described above.

Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation 
on how long an implied warranty will last or the exclusion or limitation of incidental or consequential 
damages.This warranty gives you specific legal rights, and you may also have other rights, which may 
vary from state to state.

SYSTEM PROGRAMMING - 

Menu 1

PAGE 15

AL.3

INSTALL MANUAL

WARRANTY

SYSTEM PROGRAMMING - 

Menu 1

PAGE 14

AL.3

INSTALL  MANUAL

ANTI CAR JACK MODE

ACTIVATING ANTI CAR JACK MODE

Type-1

 - The timer will start if the door is opened or if the           button is held for 3 seconds 

while the ignition is on.

Type-2

 - The timer will start if the door is opened or if the Trunk button is held for 3 seconds 

while the ignition is on. The timer will also start every time the ignition is turned on.

When programmed the Anti Car Jack timer is triggered when a door is opened or the          key 
is pressed on the remote while the ignition is on. Type 2 Car Jack Mode will trigger the timer 
with the door and trunk button as well as each time the ignition is turned on.

If Anti Car Jack is triggered, there will be no indication in the first 20 seconds.

After 20 seconds the LED will begin to flash rapidly to indicate that the Car Jack feature is 
active. After an additional 20 seconds the siren will then start to chirp each second for an 
additional 20 seconds. 

The alarm will now activate, the ignition will interrupt, parking lights will flash, and the siren will 
alert indicating trouble. The lights and siren will pause momentarily between each one minute 
cycle, and repeat until disarmed.

Note- Turn the ignition key off before opening the door to avoid triggering the Anti Car Jack 
Feature. Pressing and releasing the valet button with the key on during the first 60 seconds will 
stop the Car Jack timer.

To disarm the Anti Car Jack timer process during the initial 60 seconds of activation, turn the 
ignition key off then on, then press the valet button momentarily.

To disarm the Anti Car Jack alert process during the lights and siren cycles, turn the car off 
then on, then press and hold the valet button for 5 seconds.

This feature requires that the user must be fully aware of the operation of this feature. If the 
system goes into full alarm the remote’s will no longer function until the Anti Car Jack Feature 
is disabled.

ANTI CAR JACK FEATURE

ANTI CAR JACK ALERT

DISARMING ANTI CAR JACK FEATURE

Содержание Tarantula AL.3

















Отзывы: