WIRE DESCRIPTION
SYSTEM PROGRAMMING -
Menu 1
PAGE 6
INSTALL MANUAL
SYSTEM WIRING
Pin 1-
Wire-
AUX Channel 1 (Hold the * Button)
White/Blue
Pin 4- Black/White Wire-
Dome Light/ AUX 3 Output (Hold * and Trunk)
Pin 2- Brown Wire-
Horn Output/ AUX Channel 2 (Hold Unlock and Trunk)
Pin 1- Brown-
Siren Output (+)
Pin 5- White-
Park Light Output (+ or -) (Hold Trunk Button)
Pin 2- Red-
Constant 12volt Input
Pin 3- Black-
System Ground Input (-)
Pin 4- Red/White-
Trunk Release (- or +) (Hold Trunk Button)
Pin 3- Orange Wire-
Ground When Armed/ Starter Disable
Pin 6- Green Wire-
Negative Door Pin Input (-)
Pin 7- Violet Wire-
Positive Door Pin Input (+)
Pin 8- Blue Wire-
Hood/ Trunk Switch Input (-)
Pin 5- Yellow Wire-
Switched Ignition Input (+)
Pin 9- White/Green Wire-
2nd Unlock/ (-) When Disarmed Output
Pin 1- Green Wire-
Negative Lock Output
(-250ma Output)
Pin 2- 12volt Output for Voltage Inverter.
Pin 3-
Blue Wire-
Negative Unlock Output
(-250ma Output)
Pin 1- Brown Wire-
Starter Disable Relay. Normally Connected (N/C)
Pin 2- Brown Wire-
Starter Disable Relay. Normally Connected (N/C)
SYSTEM PROGRAMMING -
Menu 1
PAGE 7
INSTALL MANUAL
SYSTEM WIRING
Blue
Red
Green
(-) Output When Unlock Is Pressed For 1 Second. (Programmable)
(+) LOW CURRENT OUTPUT FOR VOLTAGE INVERTER ONLY.
(-) Output When Lock Is Pressed For One Second. (Programmable)
White/Green
Blue
Green
(-) 2nd Unlock Output / Ground Output When Disarmed. (Programmable)
(-) Hood/ Trunk Switch Detection.
(-) Door Pin Switch Input For Door Pin Detection.
Violet
Yellow
(+) Door Pin Switch Input For Door Pin Detection.
(+) Switched Ignition Input. This Wire Must Be Connected.
Black/White
Orange
Brown
(-) 30 Second Output When Disarmed/ AUX 3 (Programmable)
(-) Continuos Output When The Lock Button Is Pressed.
(-) Output For Horn Honk/ Car Finder. (Programmable).
White/Blue
(-) Active Output When The * Button Is Held. (Programmable).
White
Jumper Selectable Output From Park Light Relay. Default is Positive Park Lights.
Red/White
Black
Red
Jumper Selectable Output From Trunk Relay. Default is Negative Trunk Release.
System Ground Input. Connect To Chassis Ground.
System 12volt Supply. Connect To Constant 12 Volt Source.
Brown
Output For Siren Activation. (+) 2amp Max.
Brown
Cut The Starter Wire And Connect To The Key Side.
Brown
Cut The Starter Wire And Connect To The Motor Side.
WIRE DESCRIPTION
AL.3
AL.3
