Wire Diagram.................................................................Page 3
Program Mode...............................................................Page 4
Enter Program Mode
Programing Chart..........................................................Page 5
Program Menu 1
Page 5
Program Menu 2
Page 5
Wire Description...........................................................Page 6-8
Transmitter Programming.............................................Page 9
First
and Second Car Operation
PAD LOC
Shock Sensor Programing...........................................Page 10
Increase Sensitivity
Decrease Sensitivity
Diagnostics....................................................................Page 11
Diagnostics Chart
Quick View Operation Chart........................................Page 12-13
Arm/ Disarm Alarm
Auxiliary Channels
Product Warranty..........................................................Page 15
Contact Information .....................................................Page 16
Anti Car Jack Mode......................................................Page 14
SYSTEM PROGRAMMING -
Menu 1
PAGE 2
INSTALL MANUAL
TABLE OF CONTENTS
SYSTEM PROGRAMMING -
Menu 1
PAGE 3
INSTALL MANUAL
WIRE DIAGRAM
Pin 5 - WHITE -
Park Light Output (+ or -)*
Pin
4 - RED/WHITE -
Trunk Release (+ or -)**
Pin 3 - BLACK -
Ground Input (-)
Pin 2 - RED -
Constant 12volt Input (+)
Pin 1 - BROWN -
Siren (+12V)
Pin 9 - WHITE/GREEN -
2nd Unlock / (-) When Disarmed
Pin 8 - BLUE -
Trunk Switch (-)
Pin 7 - GREEN -
Negative Door Pin Input (-)
Pin 6 - VIOLET -
Positive Door Pin Input (+)
Pin 5 - YELLOW -
Switched Ignition Input (+)
Pin 4 - BLACK/WHITE -
Dome Light / Aux 3 Output
Pin 3 - ORANGE -
Ground When Armed (-250mA)
Pin 2 - BROWN -
Horn / Aux 2 Output (-250mA)
Pin 1 - WHITE/BLUE -
Aux 1 Output (-250mA)
Optional Communication Port
LED / VALET Switch
RF Antenna
Pin 3 - Green
- Negative Unlock Output (-250mA)
Pin 2 -
Output for Voltage Inverter Only
Pin 1 - Blue
- Negative Lock Output (-250mA)
Pin 2 - BROWN -
Starter Disable Relay (Normally Connected)
Pin 1 - BROWN -
Starter Disable Relay (Normally Connected)
*Park Lights are Jumper Selectable.
Default Positive.
**Trunk Release is Jumper Selectable.
Default Negative.
AL.3
AL.3
+ -
- +
Jumper’s
Trunk Release
Park Lights
