1.800.338.7337 / www.soundoffsignal.com
9
7X3 POLYCARB_WARNING 1121
RETENTION CLIP INSTRUCTIONS*
1. Plug harness into light housing, aligning tab to window, as
shown in Fig 1.
2. Install the retainer clip over harness/light interface,
inserting retainer into window, as shown in Fig. 2.
3. Press retainer clip's locking arm to snap closed.
*In the event the harness needs to be disengaged from the
light, these instructions can be used to reattach and apply
the retention clip.
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/tech-services/returns/
.
If you have questions regarding this product, contact
Technical Services
, Monday - Friday, 8 a.m. to 5 p.m. ET at
1.800.338.7337
(press #4).
Questions or comments that do not require immediate attention may be emailed to
ENHANCING SAFETY THROUGH INNOVATION
FIG. 1
WINDOW
TAB
FIG. 3
FIG. 4
RETAINER
FIG. 2
LOCKING ARM
FULLY SEATED RETENTION CLIP
