1.800.338.7337 / www.soundoffsignal.com
4
7X3 POLYCARB_WARNING 1121
7X3 STUD MOUNT PART NUMBERS
EPSSC0JY(x)-R - Stop/Tail & Turn Light, Stud Mount
EPSSC0JY(x)-A - Turn Light, Stud Mount
STUD MOUNT INSTALLATION
1. Drill (2) 1/4" holes to mount light. Drill 3/4" wire hole. See
Fig. 2
2. Thread studs into back of light.
3. Align gasket to mount surface.
4. Plug wire harness into the back of the light.
5. Press light against gasket, against mount surface.
6. Secure the light to mounting surface using (2) supplied
nuts.
DRILL FOR WIRE EXIT
DRILL FOR STUD MOUNT
CL
DO NOT USE POWER
TOOLS TO TIGHTEN
NOTE: Horizontal and vertical orientations indicated
on gasket for proper seal.
NOTE: Tighten until gasket is compressed. DO NOT
over tighten and strip casting threads.
GASKET
WIRE HARNESS
NUTTS
STUDS
FIG. 1
FIG. 2
NOT TO SCALE, FOR REFERENCE ONLY
STUD MOUNT LIGHT SHOWN
NOTE: Bezels are not compatible with Stud Mount
Option
