1.800.338.7337 / www.soundoffsignal.com
7
7X3 POLYCARB_WARNING 1121
REMOTE MODE: FOR USE WITH bluePRINT® SYSTEM ONLY
Connecting the Green wire to ground before applying power to the Red wires will place the LED module into remote mode and the light output color will be directly controlled by the input wires as shown below.
For Cruise mode or Low Power control of the LED module, the signal to the control wires must be 100 +/- 2Hz using the duty cycle inputs listed below to produce the light output.
Cruise Mode Duty Cycle
(@ 100Hz)
Input
Light Output
40%
OFF
50%
5%
60%
10%
Low Power Flash D.C.
(@ 100Hz)
Input
Light Output
70%
30%
80%
40%
90%
50%
7x3 LED Light Remote Mode
Functionality
Red Wire
Cruise
Flash
Steady ON
WIRING AND TABLE INFORMATION (CONT.)
